Solar Screen Accessories
Solar screen accessories
Showing all 13 results
Make your own solar screens with this heavy duty frame. Our solar screen frame can be used for standard window screens also. But it’s heavier duty than your standard window bug screen.
10-pack – These 5/16″ casement clips attach to the window, securing the solar screen in place. Matching color screws are included.
Brick Clips are useful for attaching solar screens to windows that are surrounded by bricks. The great thing about Brick Clips, is that it requires no modification to the window or to the screen frame. They can be easily removed and re-positioned, yet they hold the solar screen firmly in place. – 4-pack
PLEASE NOTE: Unless your solar screens were specifically measured and built for using brick clips, there’s a good chance that brick clips will not fit your existing solar screens. Brick Clips require about 1/2″ of clearance on both the left and right side of the screen (between screen frame and brick surround) in order to fit properly. If you have any questions about whether or not these will fit, please call us first.
Leaf Springs are attached to one side of the solar screen frame (typically the top edge of the frame) so the frame can be securely “wedged” into a window channel designed to hold screens. Two leaf springs per screen are needed. – 25 pack
Pull Tabs are attached to one side of the solar screen frame (typically the bottom edge of the frame) opposite leaf springs or tension springs. They allow you to grip the screen in order to remove it. Two pull tabs per screen are needed. – 25 pack
These plastic frame corners make it a “snap” (see what we did there) to assemble your solar screen frame. They are 5/16″ x 1″ and perfectly match the color options for solar screen frames we also sell.
These crossbar clips (aka center bar clips) are used to attach a single horizontal or vertical crossbar to solar screen frame. They fit the 5/16″ x 1″ solar screen frames we also sell.
Tension Springs fit into one side of the solar screen frame (typically the top edge of the frame) so the frame can be securely “wedged” into a window channel designed to hold screens. They fit inside the solar screen frame, with only the top triangular portion of the spring protruding through the frame. They are used in pairs and require notching the solar screen frame with a special notching tool. – 25 pack
Used for securing solar screens and frames to windows and other surfaces. Comes in 1″ x 1/2″ mated pairs.
Suction cups work best for mounting solar screen fabric without the frame on the inside of a window. We provide you with the requested number of clear suction cups, as well as clear, flat-head tacks, so you can position the suction cups where you need them and secure them with the matching tacks. This provides a great way to quickly fasten and un-fasten solar screens to the inside of a window in your car, home or RV. Our solar screen suction cups are clear and the diameter is 1 7/8″ when in use (1 3/4″ at rest). When in use, the thickness is about 0.7 inches. – 8-pack
Foam Spline for Solar Screens – sold by the foot. – .125 NON-Serrated. Qty – 100 ft
This roller is useful for attaching solar screens to frames using spline. One end of the roller has a grooved edge making this perfect companion to a DIY Solar Screen Kit.
Do you need a custom solar screen that you can’t order through our website? Contact us and give us the details. We’ll send you a written quote that you can pay for online here.